I tested the PushSafer-Arduino-Demo-code and got some debug-message that are very new to me
After uploading the first connecting to the WiFi was quickly successfull.
And the Pushnotification was sent.
Then I pressed Reset on my ESP32 nodeMCU-board to restart the software
then I got a bunch of these messages
Code: Select all
08:14:18.465 -> E (734) wifi:Association refused temporarily, comeback time 0 mSec
08:14:18.465 -> E (738) wifi:Association refused temporarily, comeback time 0 mSec
08:14:18.465 -> E (743) wifi:Association refused temporarily, comeback time 0 mSec
08:14:18.465 -> E (750) wifi:Association refused temporarily, comeback time 0 mSec
08:14:18.465 -> E (767) wifi:Association refused temporarily, comeback time 0 mSec
08:14:18.465 -> E (774) wifi:Association refused temporarily, comeback time 0 mSec
08:14:18.500 -> E (791) wifi:Association refused temporarily, comeback time 0 mSec
08:14:18.500 -> E (801) wifi:Association refused temporarily, comeback time 0 mSec
But I have never seen such messages in the serial monitor before
I guess these messages were printed because debugging is activated
What do the messages mean?
This is the code that I used
Code: Select all
#if defined(ESP32)
#include <WiFi.h>
char deviceType[] = "ESP32";
#else
#include <ESP8266WiFi.h>
char deviceType[] = "ESP8266";
#endif
/*#include <WiFiClientSecure.h>*/
#include <WiFiClient.h>
#include <Pushsafer.h>
// Initialize Wifi connection to the router
char ssid[] = ""; // your network SSID (name)
char password[] = ""; // your network key
// Pushsafer private or alias key
#define PushsaferKey ""
/*WiFiClientSecure client;*/
WiFiClient client;
Pushsafer pushsafer(PushsaferKey, client);
void setup() {
Serial.begin(115200);
Serial.println("Setup-Start");
// Set WiFi to station mode and disconnect from an AP if it was Previously
// connected
WiFi.mode(WIFI_STA);
WiFi.disconnect();
delay(100);
// Attempt to connect to Wifi network:
Serial.print("Connecting Wifi: ");
Serial.println(ssid);
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED) {
Serial.print(".");
delay(500);
}
Serial.println("");
Serial.println("WiFi connected");
Serial.print("IP address: ");
Serial.println(WiFi.localIP());
pushsafer.debug = true;
// Take a look at the Pushsafer.com API at
// https://www.pushsafer.com/en/pushapi
struct PushSaferInput input;
input.title = deviceType;//"Hello!";
input.sound = "3";
input.vibration = "3";
input.icon = "20";
input.iconcolor = "#FFCCCC";
input.priority = "3";
input.message = "vibrate input.answer = 1";
input.device = "a";
input.url = "https://www.pushsafer.com";
input.urlTitle = "Open Pushsafer.com";
input.picture = "";
input.picture2 = "";
input.picture3 = "";
input.time2live = "";
input.retry = "";
input.expire = "";
input.answer = "1";
Serial.println(pushsafer.sendEvent(input));
Serial.println("Sent");
// client.stop();
}
void loop() {
}