Multiple IP cams in domoticz

[bullit]

Hello Kevin,

It works, after the private key i set: &i

[admin]

Hello Kevin,

It works, after the private key i set: &i

Great that you got it to work.
If you have further questions please feel free to ask.

Kevin

[sammyke007]

Hi

Where did you put the &i exactly? Can you post a screenshot?
I put this in the custom message field:

Code: Select all

xxxxx|7693|82|17|1|Deurbel|Er staat iemand aan de deur!|http://MY_IP/cgi-bin/CGIProxy.fcgi?cmd=snapPicture2&usr=xxx&pwd=xxx|||

But I receive literally the exact same as above in the push message...

[admin]

Do you get the notification?
What issue you have? Can you describeb a little more!

Do you set the private key in the notification settings in domoticz?

Here you will find an instruction:
https://www.pushsafer.com/en/domoticz

Kevin

[sammyke007]

Hi Kevin

In Domoticz > Setup > Notifications Pushsafer is configured with an API key. The TEST button works too.
However, when I fill in the custom message

Code: Select all

xxxxx|7693|82|17|1|Deurbel|Er staat iemand aan de deur!|http://MY_IP/cgi-bin/CGIProxy.fcgi?cmd=snapPicture2&usr=xxx&pwd=xxx|||

in a notification of a switch (when on), it pushes me the exact command from above instead of the message + picture
It sends the command with the pipes...

[admin]

Hi,
can you post an screenshot of the notification page from the switch and also one from the domoticz error log.

Thanks Kevin

[sammyke007]

Hi Kevin

I have the exact same problem as the topicstarter. He said that he solved it by putting &i somewhere, but I don't understand...

Switch


Log


Notification settings

[sammyke007]

Found it!

After the last pipe symbol needs to be a 0!

DOESN'T work

Code: Select all

xxxxx|7693|82|17|1|Deurbel|Er staat iemand aan de deur!|http://MY_IP/cgi-bin/CGIProxy.fcgi?cmd=snapPicture2&usr=xxx&pwd=xxx|||

Works!

Code: Select all

xxxxx|7693|82|17|1|Deurbel|Er staat iemand aan de deur!|http://MY_IP/cgi-bin/CGIProxy.fcgi?cmd=snapPicture2&usr=xxx&pwd=xxx|||0

[admin]

Great to hear, that you could solve the issue.

I will check this with a new domoticz plugin update!
Normally it should work with a value in the last parameter.

Thanks Kevin